 |
 |
 |
|
Product Detail:- Acid Stained color will not chip, fade, or peel. It actually changes the coloring of the cement surface.
- Our Acid Stain leaves little residue, making it much easier to work with and clean up than most acid stains on the market.
- Acid stains create the most unique, striking color to concrete surfaces.
- Acid staining is one of the most explosive market trends in today's concrete industry.
- Turn an ordinary concrete basement into a beautiful showroom.
- Create beautiful marbled effects on concrete countertops, floors, or slabs.
- Acid stains can be applied in so many ways, with so many effects, you are only limited by your creative ability.
- About Acid Stain colors: Ebony- Almost Black. Walnut- Rich Black with Brown Undertone. Mahogany- Deep Rust, Terracotta. Coffee- Medium Brown with a Slight Red Hue. Mission Brown- Rich, Medium Rusty Brown. Weathered Terracotta- Red/Orange Terracotta. Caramel- Light, Yellowish Brown. Amber- Slightly more Orange than Caramel. Olive- Mossy Green. Jade- Deep Green. Turquoise- Lighter Green.
Specifications:- Available in 1 Gallon containers, 4 oz. samples, and a kit of all 11 4 oz. sample bottles.
- Coverage: Approximately 200-300 sq. ft. per gallon. One 4 oz sample bottle will stain approx. 6-10 sq. ft.
- Variations in finished color may occur due to difference in concrete mix, sand, aggregates, cement color, and water-cement ratio.
- View TDS (Technical Data Sheet).
- View MSDS (Material Safety Data Sheet).
- View Sales Brochure (With Color Chart)
Color Chart:
Application:- Please note that colors shown are a representation of what the final color will look like. Actual color will rely heavily on skill, practice and experimentation. Application methods and age of concrete will affect the color tones and hues.
- A key factor to successful acid staining is a very clean surface. For best results on floors that are not brand new, un-soiled slabs, the surface should be scrubbed with a low suds cleaner and water using a powered floor buffing machine.
- DO NOT use muriatic or hydrochloric acid to 'clean' the surface before staining. This practice is a myth, and will lessen the actual reaction of the acid stain color if you do so.
- Acid stains can be applied in unlimited ways. Each method has unique characteristics and appearance.
- Basic application: Spray or mist the acid stain onto the concrete using a specially designed sprayer for acid, Sold Separately Here. DO NOT use a sprayer with metal parts when spraying acid, as they will corrode. Immediately brush the surface with a stiff bristle brush or broom. When finished, rinse the sprayer with clean water to remove any acid residue.
- Alternative applications: Blot acid stain onto concrete using sponges, brushes, or even crumpled plastic or paper bags. There is no limit to the ways stains can be applied.
- Acid stain should be left on the concrete surface 2-4 hours before either applying another coat, or rinsing.
- Apply second and third coats (if desired) right over the existing coat to deepen the color and patina.
- Rinse well with clean water, and then neutralize. Improper neutralization and cleaning will result in poor sealer bonding.
- To neutralize, use alkaline soap if available. Otherwise neutralize with 2 cups of household ammonia or bleach mixed with 5 gallons of water, and a few squirts of dish soap. Scrub the concrete using this mixture, using a broom/scrub brush, and mop.
- Clean up the residue with a wet vacuum, mop or sponge. Thoroughly rinse concrete when done, and allow to dry 1 to 2 days before sealing. Concrete Sealers sold here.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Shipping Information:
- This product usually ships within 1-2 business days, via UPS.
- NOTE- Acid Stains only ship via UPS, and ship as ORM-D material via UPS Ground (no additional shipping surcharges). Shipping via 3-Day Select, 2-Day Air, or Overnight, is available, but must ship as HAZMAT material, with additional fees. Please contact us if rush delivery is required.
|
|
|
|
|
|
|
Shopping Cart
