Call Us: (801) 806-0529
Welcome to Expressions-LTD.com. Earn EXP Points on your purchases which can be redeemed as store credit towards future orders-
Click for details...
Concrete Paper Stencil - Cobble Brick
MSRP (base model)
Shipping: Usually Ships in 1 to 2 Business Days
Stencil Box Size
Full Box [Add $95.00]
Cobble Brick stencil. Available in Half box and Full box, to best suit your need.
Stencils are designed for use with wet concrete and overlay resurfacing systems.
Manufactured using superior high-strength white paper that can handle the toughest conditions.
White Paper Stencils are superior to most other 'brown' stencils, that are thinner, have problems laying flat, and tear easily when used.
Stencils are used to achieve the look of stone, tile or brick without the higher installation and maintenance costs associated with such applications.
Stenciled concrete and overlays leave a flat and even surface better suited for pool decks, walkways, driveways and interior floors.
Non-adhesive white paper stencils which are poly-coated on both sides for maximum moisture resistance. Made of thicker paper, these stencils may be used more than once depending on application method.
Cobble Brick Coverage:
Half-Box: Roll is 37" Wide (Approximately 500 sq. ft. of coverage)
Full-Box: Roll is 37" Wide (Approximately 1000 sq. ft. of coverage)
Average Brick Size: 5 1/2" x 8 1/2"
Joint Width: 1/2" - 3/4"
*NOTE: Pattern measurements may vary slightly due to normal manufacturing tolerances.
Stencils are Designed for Professional Use
Standard Application Method- Fresh Concrete:
Apply stencil to fresh concrete. Lightly press stencil evenly into concrete surface. Apply color hardener and/or antiquing release agent followed by texture mats. Remove stencil when cement paste is set up enough to flake off the stencil.
Standard Application Method- Overlay
Lay the stencil down on the existing concrete surface. Once stencils are evenly laid out and flat, spray an Acrylic Overlay straight down, not at an angle, over the stencils. Remove stencil carefully.
Alternate Application Methods:
Trowel over stencils with a thin layer of Micro-Topping.
Careful use of acid stain is also possible over a stencil, but recommended for experienced applicators only.
Usually ships within 1-2 business days, via UPS only
Concrete Edge Liner Single Sample
Concrete Stencil Brick Header
Concrete Table Vibrator Electric
Concrete Edge 1.5 Inch Slate
Concrete Stencil Bushrock Header
Concrete Stencil Original Herringbone
Concrete Edge 5-Pack
Rocktop CT 519 Primer
Share your knowledge of this product.
Be the first to write a review »
Browse for more products in the same category as this item:
Sign Up for our Newsletter:
EXP Points MyRewards
Shipping and Returns
Terms & Conditions
Copyright © 2004-