Product Details:

• Professional Grade Epoxy Coating. NOT the 'hardware store' epoxy paint that doesn't last!
  
• Shield™ 50 is a 100% solids and 100% cross-linked epoxy.
• Apply to almost any surface: Concrete, Wood, Tile, Stone, etc.
• Used as a primer under a polyurethane coating (SuperGlaze 3600), or epoxy topcoat (UV Shield).
• Shield 50 can be pigmented- color chart below.
• High-Build epoxy floor coating for light and moderate duty commercial and industrial use.
• Use on dry concrete surfaces as a pigmented base coat, or clear (straw) top coat for foot traffic and vehicular pneumatic tire traffic.
• Use as a base coat binder for Acrylic Flake or Quartz floor systems. (Lay the Shield 50 down, and then broadcast the Acrylic Flake or Quartz Sand onto the wet epoxy).
• No VOC's - 100% Solids.
• 100% Cross-Linking
• Low Odor
  
• Good working time. Medium cure rate. Cures down to 50°F.
• Excellent strength properties. High compressive strength. Excellent impact resistance.
• DOT Non-Corrosive.

Specifications:

• Coverage: 1 Gallon covers approx. 150 sq ft.
• Sold in 1, 3, 5, and 15 Gallon kits. Also available in drums upon request.
• Mix ratio: 2:1 A:B
  
• View Shield 50 MSDS
• View Shield 50 TDS (Application Instructions and Technical Data)
• Apply by squeegee in left to right motions, and back roll with a short-nap roller at 90° angles to squeegee lines. Do not roll excessively, only enough to smooth material.

Optional Color Chart: