 |
 |
 |
|
Product Detail: - "No Solicitors" plaque, engraved from solid pewter or red bronze (High quality engraving).
- Available on stone tile pieces (or with the No Stone option).
- Each stone piece is unique and will vary slightly in appearance.
- Optional doorbell button can be mounted to the stone, underneath the No Solicitor plaque for $6 extra.
- Doorbell button illuminates a soft amber, and is for use with wired, non-battery operated doorbell systems only.
- This item is custom-made to order, so is non-refundable.
Product Specifications: - Bronze Plaque dimensions: 3.75"W x 1.75"H.
- Optional Stone sizes: 4"L x 4"W, 5.25" Tip to Tip.
- When ordering optional doorbell button, it will require a small hole (approximately 3/4" wide by 1/2" deep) behind the stone piece for the back of the button to fit into.
- Mounting adhesive included for simple installation to any surface.
Product Specifications: - About Stone sizes:
- Standard Stone: 4"L x 4"W, 5.25" Tip to Tip.
- Narrow Travertine- 2"W x 4"H.
- Narrow Green Slate- 3"W x 6"H.
- About Mounting Styles:
- Diamond: Stone Tiles are in a diamond orientation.
- Square: Stone Tiles are in a square orientation.
- N/A: Not Applicable- Narrow Stones can only be oriented in the square direction.
- Each stone is unique, and color may
vary. Real stone means colors, textures, variations, etc. will vary
from piece to piece. Dark Travertine may appear lighter than pictured,
Light Travertine may appear darker than pictured, Green Slate may appear
a different shade.... etc.
- As each Stone Doorbell is custom made upon order, they are non
returnable- so please make sure you are aware that each individual
doorbell may vary.
Installation:
- This doorbell requires a small hole approx 3/4" wide by 1/2" deep behind the doorbell for the back of the button to fit into.
- Each doorbell includes a small pack of adhesive, which will bond
the doorbell stone to any surface- brick, stucco, wood, vinyl, etc.
- The back of the stone will have some double-sided tape on it, which is
just a temporary way to hold the Doorbell to the wall until the adhesive
dries.
- To install, simply connect doorbell wires to button, and apply the
adhesive to the back of the Doorbell Stone. Peel the paper cover from
the double-sided tape, and stick the Doorbell to the wall surface. Hold
the doorbell to make sure the double-sided tape is holding it in place
as it should. The adhesive glue should harden within a day.
- For hard to bond to surfaces,
use masking tape to hold the Doorbell to the surface in addition to the
double-sided tape, until the adhesive glue dries.
- Mounting adhesive included for simple installation to any surface.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Shipping Information:
- Stone Doorbells usually ship within 2-3 business days.
- Ships via UPS, so please ensure the ship-to address is NOT a PO Box.
- Free Shipping applies to the US 48 states. Outside areas will be charged a flat $12 shipping upon Check Out.
- If actual shipping costs for your address are more than this, we will contact you and review your order.
|
|
|
|
|
|
|
Shopping Cart
