Call Us: (801) 806-0529
Customer Service Software
Email Marketing Software
Welcome to Expressions-LTD.com. Earn EXP Points on your purchases which can be redeemed as store credit towards future orders-
Click for details...
Stainless Steel Skull Door Bell
MSRP (base model)
Shipping: Usually Ships in 1 to 2 Business Days
RING-Light, Yellow (Amber)
DOT-Light, Yellow (Amber)
Non-Lit, Stainless Steel
BLACK RING-Light, Blue
BLACK RING-Light, White
BLACK DOT-Light, Blue
BLACK DOT-Light, White
SS Button Voltage
12 Volt (max)
16 Volt (max) [Add $2.00]
24 Volt (max) [Add $4.00]
Phillips Head Screws
Tamper Resistant Screws [Add $3.00]
Solid stainless steel doorbell cover plate, 3/16" thick, with a brushed finish.
"Skull" design door bell. Especially cool for Halloween doorbell pushing!
Illuminated LED push buttons less than 1 watt, and last approx. 11 years.
LED buttons available in Ring-Light, or DOT style. Ring Light: A bright glow ring around a stainless steel center. DOT Light:Very bright center LED glow.
Doorbell Buttons are theft-resistant. Each button is secured on the back of the doorbell cover by a hex-nut.
Will work with new or existing doorbell systems, and can replace most garage door opener buttons.
Doorbell Only. Door chimes, power transformers, and wire sold separately.
One year manufacturer warranty against defect.
Doorbell Cover Measurements: 1 3/4" Wide x 2 3/8" High x 3/16" Thick.
Push Button Measurements:
RING and DOT Light LED Buttons: 11/16"W x 1 3/4"L. Threads: 5/8" wide.
Non-Lit Buttons: 11/16"W x 7/8"L. Threads: 5/8" wide.
Push Buttons are available in 3 voltages: 12V (8-12 Volts AC) or 16V (12-16 Volts AC) or 24V (12-24 Volts AC). Match to your doorbell/doorchime transformer output, or use a voltage tester on your existing wires to determine voltage
Exceeding the button's voltage can prematurely burn out the LED in the button. If unsure, and unable to determine, we recommend ordering the 24V button to prevent the LED from premature burnout.
LED Power Consumption: 12V: 0.24 Watts, 16V: 0.32 Watts, 24V: 0.48 Watts.
Installation Instructions: Attach the doorbell button to the stainless steel doorbell cover using the provided hex-nut. Drill a 3/4" (20mm) wide hole into doorjamb (or surface for doorbell) approximately 1 1/2" deep for RING or DOT Light buttons, 1" deep for Non-Lit buttons. Attach one wire to each screw terminal, which wire going to which screw terminal doesn't matter. Use the provided screws to mount the doorbell cover in place.
Optional Tamper Resistant screws come with a special driver bit for installation/removal. Due to the small nature of the special driver bit, it is necessary to pre-drill holes for the tamper-screws. Failure to pre-drill the holes may result in breaking the driver bit trying to force the screws into the doorjamb or wall surface.
Doorbell Connection Diagram:
Doorbell Push Buttons:
Product usually ships in 1-2 business days.
Craftsman Style Doorbell 1611
Edwardian Style Doorbell 1603
Tri-Grapes Stone Doorbell
Boston Terrier Dog Stone Doorbell
Victorian Style Doorbell 1602
Texas Stone Doorbell
Curl Stone Doorbell
Military Stone Doorbell US Army
Share your knowledge of this product.
Be the first to write a review »
Browse for more products in the same category as this item:
Stainless Steel Doorbells
Sign Up for our Newsletter:
EXP Points MyRewards
Shipping and Returns
Terms & Conditions
Copyright © 2004-