SureCrete’s Dura-Kote premium clear floor epoxy 100% solids is a high-quality clear thick build floor coating for a high gloss shine used as a top coat, or part of a system to create a 3D metallic floor (3D Metallic Color Pearl additive sold here). Dura-Kote DK series is available in an Economy, Premium, and Premium Thin Viscosity formula.
- 3-Gallon Kit, 15-Gallon Kit
- 100% Solids
- High Gloss
- Economy Formula: Thicker, good for filling defects/low spots in the floor. Coverage around 40-50 sq. ft. per gallon.
- Premium Formula: Most commonly used of the 3 formulas. Provides a thick coating, and great depth when used with Metallic Pearl add in colors. Coverage around 60-70 sq. ft. per gallon.
- Premium Thin Viscosity, PTV: Thinner, won't fill in defect/low spots in the floor very well, but is good for extra coverage on a flat floor surface, and good for getting extra fluidity and movement of the Metallic Pearl add-in colors. Coverage around 110-125 sq. ft. per gallon.
Coverage Economy: 40-50 sq. ft. per gallon. Premium: 60-70 sq. ft. per gallon. PTV: 110-125 sq. ft. per gallon. (Varies based on application surface and application method) VOC Rating 0 g/L Solids Content 100% Shelf Life 1 year in original unopened container Mixing Ratio 2 parts A to 1 part B Pot Life 10-20 minutes Ready for recoat 6-8 hours (18+ hours at low temperatures) Light Duty Use Approx 16 hours (Up to 30 hours at low temperatures) Heavy Traffic Ready Approx 24 hours (Up to 3 days at low temperatures) Full Cure 5-7 days (Up to 14 days at low temperatures) Appearance (cured) High gloss sheen Appearance (wet) Clear – Straw Color Water Resistance Excellent beads water Mechanical Stability Excellent Light Stability Yellows Odor Sweet Adhesion 400 PSI (concrete failure) Abrasion Resistance (Tabor) 1,000 gm. load @ 500 cycles = 31 mg loss Compressive Strength 9,000 PSI Application Temperature 50 – 90 degrees Fahrenheit
QUESTION: CAN I USE JUST ONE COAT OF DURA-KOTE FLOOR EPOXY 100?
Answer: Yes, you can! Although it will depend entirely upon your desired finished floor and the amount of protection you need, Epoxy 100 was designed specifically for this purpose!
QUESTION: WILL DURA-KOTE EPOXY 100 SELF-LEVEL AND FILL SMALL HOLES?
Answer: Yes, it certainly will! However, be sure not to try to bridge expansion joints as these are necessary to allow movement in the concrete.
QUESTION: CAN EPOXY 100 BE USED OUTSIDE?
Answer: No, epoxy coatings are not vapor-permeable and therefore should not be utilized in exterior applications.
QUESTION: I HAVE STRICT VOC LAWS IN MY AREA, CAN I USE DURA-KOTE EPOXY 100?
Answer: Without question, yes! At zero grams per Liter of VOC content, Epoxy 100 can be utilized no matter how strict local VOC laws are!
QUESTION: IF I’M PUTTING DOWN THE SECOND COAT OF EPOXY 100, DOES IT HAVE TO BE SCREENED?
Answer: Yes, because of its chemical nature and high solids content, the second coat will not bond correctly without proper screening of first coat.