Poly PVA Solution Coating Release Polytek
Poly PVA Solution Coating Release Polytek
Poly PVA Solution Coating Release Polytek

Poly PVA Solution Coating Release

Precio de venta$31.09
Poly PVA:Clear Quart (2 LBS)

Ships from Pennsylvania
(Click for average Ground delivery map )
Shipping: This Product can take 2 to 5 business days to ship out.
Ships via FedEx/UPS only

Poly PVA Solution Coating Release

    • Water-soluble, alcohol-based sealer for porous models.
    • Use as a barrier coat on certain rubber molds to reduce resin attack on the mold.
    • Can also be used as a removable sealer on porous surfaces.
    • Release agents such as Pol-Ease 2300 should be used in addition before applying liquid polyurethane to a coated master or before casting liquid plastic into a coated mold.
    • Available in clear or green colors. The green PVA is easy to see the release to ensure proper coverage and to clean off later, but may stain some porous surfaces.
    • Clean off with water to dissolve the PVA Coating.
    • Documentation: SDS

    USE Poly PVA Solution Coating Release

    • For Mold Making: Poly PVA Solution can be brushed lightly over any porous surface that needs to be sealed. It dries to the touch within an hour (depending upon coating thickness and workshop humidity). The advantage of Poly PVA Solution is that is can be removed with water once the mold making process is complete. It is suitable for use with both silicone and polyurethane mold rubbers; however, additional release agent (i.e., Pol-Ease 2300 Release Agent) must be applied when working with liquid polyurethane rubbers.
    • For Casting: Poly PVA Solution can also be applied to cured polyurethane rubber molds as a “barrier coat” (in conjunction with Pol-Ease® 2300 Release Agent) and is most often used when casting polyester resin (some resins, such as polyurethane, do not require a barrier coat). PVA Solution should be allowed to completely dry before pouring any casting material into the mold. Generally, Poly PVA Solution needs to be reapplied before each use, as it often comes out of the mold when removing the casting. NOTES: Words of caution: Even though Poly PVA Solution can be removed, do not expect the model to look exactly the same after the mold making process as before. Removable PVA is helpful when a customer needs a model returned to as close to original as possible; however, residual PVA, release agent (if used over the PVA) or the application of water to a model may change its physical appearance (e.g., color, texture) to some extent. If the PVA is left on the model (not washed off with water), it should continue to act as a sealer the next time a mold is made. Do not use a water-based release agent on a PVA-sealed model as this will dissolve the PVA, negating its ability to seal the surface of the model. If the model is to be washed with water, it obviously must be made of a material compatible with this process.