Concrete Acrylic Solvent Based Sealer- Trinic Stampshield

Concrete Acrylic Solvent Based Sealer- Trinic Stampshield

Stamp Shield is specifically designed for use on Stamped concrete, pavers and natural stone to provide stain protection by penetrating and chemically reacting with the natural materials found in concrete and stone. Matte version will appear reddish orange in the bucket - this will dry clear. (Mix contents before use)

• Available in Satin or Matte finish
• Permanent part of the surface
• Will not chip or peel
• Breathable / will not white out from trapped moisture
• UV resistant / won’t yellow with exposure to sunlight
• Resistant to all common staining agents
• Easy application
• Color enhancing / natural finish
• Thin build, high performance
  
  
• Coverage:
• Aerosol Can: 5-10 sq. ft. per can
• Gallon: 150 sq. ft. per gallon on porous concrete.  Up to 400 sq. ft. per gallon on re-seals and power troweled concrete surfaces.
• Download Stamp Shield Data Sheet
• Download Stamp Shield Safety Data Sheet

Application Trinic Stampshield

Professional use only. Stampshield can be brushed or rolled, but for best results and to avoid over application, it is recommended to be sprayed on using a high quality pump up sprayer with Viton seals and a fine to medium tip. It is important to not over apply Stampshield so that it remains breathable; the best way to ensure correct application is to apply two thin coats. First coat should color enhance most of the surface but leave no shine. The second coat will even out the surface to a uniform color enhanced look with no to a very slight sheen.

TEMPERATURE / CURE RATE Trinic Stampshield

• Do not apply Stampshield in temperatures under 40°F or above 95°F
• Waterproof in 10 minutes
• Walkable in 30 minutes
• Traffic within two hours

TESTING Trinic Stampshield

• Blush: 4 hr dry / 24 hr immersion does not blush • Adhesion: D-33598 Excellent • Water beading: beads water • QUV G-53 250 hrs: no blistering, no yellowing • Abrasion resistance: D-460 20 mg loss • Chemical resistance (12 hour covered) D-1308-87: – Transmission fluid: no effect – Gasoline: softens, recovers – Formula 409: no effect – Motor oil: no effect – Brake fluid: softens, recovers – 10% hydrochloric acid: no effect – 10% sulfuric acid: no effect – Red wine: no effect – Vinegar: blemish, repairable • Pencil hardness: D-3363 6H • Hot tire pick-up: passed • Mechanical stability: excellent • Light stability: excellent UV exposure shows no degradation • Meets ADA coefficient of friction standards (ASTM F1677) 0.55-0.69 for standard and 0.70-0.82 (ASTM-C779) for anti-skid version