Poolform Form Liner - 3" Bullnose Slate Edge
- Poolform Form Liner - Bullnose Slate Edge, creates a rounded bullnose edge with slate surface to the concrete.
- A Flexible rubber insert that will lock into the Z Poolforms.
- Re-usable. Made in the USA
- These liners can also be used with concrete countertops, steps, fireplaces, etc.
Specifications Poolform Form Liner - 3" Bullnose Slate Edge:
- Size: 8' long each, 3" height. Approx. 1" thick.
- Sold by Single Liner or 4-packs and 8-packs.
- Each liner has a special groove on the top-back side that allows it to be locked into place in the Z Poolform.
- Liners can be cut with a sharp razor blade, or chop saw.
- Gaps between liners can be filled (if desired) with silicone caulking and smoothed to hide the seam, or just plan to saw-cut an expansion joint in the concrete on each spot where the liners meet.
How To Use Poolform Form Liner - 3" Bullnose Slate Edge:
View basic Z Poolform Installation Instructions
Poolform Liners are placed in the Z Poolform forms and snap into place (watch video below to see this done).
Apply a Z Form Release, or other rubber-safe form release (NO diesel!) just prior to placing the concrete.
Watch video below for full Poolform application process: