Rock N Roller Concrete Stamp Texture Roller - 23 1/2" Heavy Slate
- Rock N Roller™ Texture Roller - 23 1/2" Heavy Slate
- Five times faster than traditional stamping methods. If you pay laborers to stamp concrete, you will pay this roller off with just a few jobs using it.
- Add weights to ensure a uniform imprint as the concrete begins to harden
- No special setup for borders
- Ultra lightweight. You start stamping as soon as the bleed water has evaporated- no need to wait for concrete to be hard enough to support walking on it.
- Made in the USA
Specifications Rock N Roller Concrete Stamp Texture Roller - 23 1/2" Heavy Slate:
- Heavy Slate Roller, 23.5" Width
- Includes: Roller, frame with weight poles, 2 weights, and a 1¾" push-button adapter
To Use Rock N Roller Concrete Stamp Texture Roller - 23 1/2" Heavy Slate:
- The Roller connects to standard concrete extension poles, or you can rig up your own method to pull it across large spans using rope.
- Once bleed water is gone, use Liquid Release or Powder Antiquing Release on the concrete and the roller, and begin rolling.
- If you find you need more weight to push the roller into the concrete, slide weights (Rock N Roller Weights sold here) onto the metal rods on top of the roller.
- Use smaller Texture Rollers and to finish off around edges and fine tune.
- The 9" Heavy Slate Texture Roller matches this 24" Heavy Slate pattern.
- Watch the videos below for more information, but if you don't need a roller don't watch (because you'll be compelled to buy one once you see what they do)