Non Slip Additive for Concrete Sealers and Coatings

Non Slip Additive for Concrete Sealers and Coatings

• Non Slip Additive is a micronized polymer used to create a safe, textured surface.
• Clear, lightweight spheres suspend easily in sealer and coating products.
• Mix with concrete sealers or floor coverings (epoxy/urethane coatings).
• May also be broadcast over wet sealers.
• Will not affect topcoat color.
• Creates a non slip surface on driveways, garages, steps, patios and pool decks. Especially useful around stairs or wet areas.
• When mixing in with sealer, constant stirring/mixing is necessary during the application process to keep the grit from settling to the bottom.

Specifications Non Slip Additive for Concrete Sealers and Coatings

• Measurements: 1 lb. (16 oz.) Container.
• Coverage: 1 lb. Non Slip Additive added into 5 gallons of sealer will typically cover 750-1000 sq. ft.

Application Non Slip Additive for Concrete Sealers and Coatings

• Combine 16 oz. of No-Slip Grit to 5 gallons of sealer. Stir/mix well.
• For smaller amounts of sealer, mix approximately 3 ounces of non-slip additive per gallon of sealer.
• Apply sealer to concrete surface by roller or brush.
• Continuous stirring/mixing of the sealer is necessary during application to keep the non slip additive from settling.
• Can also be hand broadcast over the sealer or epoxy immediately after applying (but be careful to broadcast the non slip very lightly and evenly dispersed.  Test a small area to become familiar with the process!