Polyaspartic Clear Gloss Super Hard Floor Coating, Surecrete DK-120 / DK-180

Loading reviews...
$134.09
  • Polyaspartic Clear Gloss Super Hard Floor Coating, Surecrete DK-120 / DK-180
Polyaspartic Clear Gloss Super Hard Floor Coating, Surecrete DK-120 / DK-180 Polyaspartic Clear Gloss Super Hard Floor Coating, Surecrete DK-120 / DK-180 Polyaspartic Clear Gloss Super Hard Floor Coating, Surecrete DK-120 / DK-180 Polyaspartic Clear Gloss Super Hard Floor Coating, Surecrete DK-120 / DK-180

Polyaspartic Clear Gloss Super Hard Floor Coating, Surecrete DK-120 / DK-180

Loading reviews...
$134.09
Usually takes 1-2 business days to ship.

Free shipping for online-orders $49 or more!! (US 48)

  • PLEASE NOTE!! We are currently not able to ship this Surecrete product to any states on the Eastern Half of the United States. We are limited to shipping to states including, and to the West of: Texas, New Mexico, Colorado, Wyoming, Montana.

    HIGH GLOSS CLEAR POLYASPARTIC FLOOR COATING

    The hardest clear coating available to protect interior concrete surfaces. Polyaspartics are color enhancing and fast curing. Great for commercial projects on deadlines.

    POLYASPARTIC FLOOR COATING CLEAR HIGH GLOSS DK-120 AND DK-180 DURA-KOTE BY SURECRETE

    Do you want that polished concrete floor to look without having to wait the days or weeks it would take you to grind and polish, and then grind and polish some more? Then SureCrete’s high gloss clear polyaspartics floor coatings are the products you’re looking for. Our Dura-Kote polyaspartics have been specially formulated for professional use in the concrete sealer and decorative concrete industries. Once cured, they are some of the hardest coatings available on the market today, and they cure in as little as 2 hours.

    Polyaspartics are far and away the first choice for applicators when working in environments that require a very fast turn-around time for projects, such as supermarkets or high-end commercial retail locations that can’t afford to be closed for any period. These products allow you as a professional applicator to prepare, re-color and apply two coats of sealer to a floor between the time the retailer’s doors close for the night and re-open in the morning.

    DK 120: 2 Hour Cure. 67% Solids. 330 g/L VOC. Coverage: 300-400 sq. ft. per gallon. Mix 4A:1B.

    DK 180: 4 Hour Cure. 80% Solids. 200 g/L VOC. Coverage: 150-200 sq. ft. per gallon. Mix 3A:1B.


    DURA-KOTE DK 120 CLEAR FLOOR POLYASPARTIC COATING – 2-HOUR CURE 67% SOLIDS

    SureCrete’s Dura-Kote PFC-120 is a specially formulated 67% solids hybrid solvent based polyaspartic coating designed for application over interior concrete, cement-based overlays, or as a top finish coat on epoxy systems. Dura-Kote PFC-120 provides a low VOC (330 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss wears surface. The high-performance clear top coat generates the premier balance of strength, flexibility, chemical and scratch resistance. As a vertical wall coating, it enhances anti-graffiti properties. Dura-Kote PFC-120’s rapid cure time eliminates excessive waiting to return a floor to service. Unlike many polyaspartics, it has a user-friendly pot life of approximately 20 – 30 minutes. Turnaround time for a floor may be as little as 5 – 6 hours. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

    When dealing with commercial applications where complete business shut down is not a feasible option, polyaspartic coatings provide a much-needed solution. When the floor is prepped properly for these coatings, they can be applied overnight in a very small application window to ensure that no time is lost for the business. This is especially necessary for retail and restaurant or bar locations that can’t afford to close for even one day. Not only are polyaspartics very quick to apply, but they also offer an astounding amount of chemical and abrasion resistance. These properties also make PFC-120 an ideal coating for DIY homeowners who only have a short period (usually one day/night on the weekend) to get their project finished.


    DURA-KOTE DK 180, 4 HOUR CURE THICK BUILD FLOOR POLYASPARTIC CLEAR COATING

    Dura-Kote DK 180 (Also called PFC-180) is a specially formulated 80% solids hybrid solvent based polyaspartic coating. Unlike many polyaspartics, it has a user-friendly pot life of approximately 20 minutes and the ability to create a moderate build (6 ½ mil) single coat top coat. Turnaround time for a floor may be as little as 6 – 8 hours. Epoxy flakes may be covered in a single pass. Dura- Kote PFC-180 provides a low VOC (less than 200 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss, moderate build wear surface. The rapid cure time eliminates excessive waiting to return a floor to service. It is ideally suited for both commercial and residential settings: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

    Some projects simply require a realy fast turn-around time. PFC-180 is the ultimate combination of easy workability and fast curing properties. Using Dura-Kote PFC-180, the vast majority of concrete surfaces can be given a single coating and be ready to receive foot traffic in just a few hours! This is especially ideal in retail and service industry business arenas where closing shop for any period of time is simply not an option. With PFC-180, a professional contractor can easily prepare and seal an entire floor in just one 6 to 8 hour period of time. For a homeowner looking to complete his weekend project in just one day, PFC-180 can provide the necessary cure time without sacrificing any level of protection as might be typical of acrylic or other less chemical or abrasion resistant sealers. And at such a low VOC rating of under 200 grams per Liter, PFC-180 is also ideally suited for architecturally green projects and for generating LEED points to help land these types of jobs.


    HIGH GLOSS CLEAR POLYASPARTIC FLOOR COATING APPLICATIONS:

    • Retail Flooring
    • Commercial Concrete Applications
    • Quick-Dry Residential Coatings
    • Fast-Curing Service Industry Coatings
    • Hotel and Resort Floors
    • High-Traffic Interior Applications
    • Fast Turn-Around Projects
    • Residential Living Areas

    HOW DO YOU APPLY SURECRETE’S DURA-KOTE HYBRID POLYASPARTIC HIGH GLOSS SEALER?

    1. Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants and fully profiled and etched.
    2. Make sure that temperatures will remain between 32 and 90 degrees Fahrenheit and relative humidity to stay below 75% for a period of at least 12 hours following application.
    3. As a by product of it’s very fast curing properties, polyaspartics are extremely sensitive to moisture in the substrate it is applied to, so care should be taken to keep moisture in the concrete near zero.
    4. (DK 180) Pour 1 part “B” into 3 parts “A”. (DK 120) Pour 1 part “B” into 4 parts “A”. Mix in a large mixing container (Comes pre-measured in kits to make it easy on you, but if mixing smaller amounts you will need to measure accurately) and mix mechanically for a minimum of 2 minutes.
    5. Use a premium, de-fuzzed, phenolic core roller to roll out thin coats over workable area, making sure to maintain wet edges and backroll the entire surface.
    6. Though not usually necessary, if you would like to apply a second coat, first coat must be dry to the touch (typically within 2 hours depending on environmental conditions). If first coat has cured beyond 10 hours, the floor needs to be screened with a 100 grit sanding screen prior to second coating to ensure a good bond. Second coat applies same as first coat.
    7. While not necessarily required, we suggest the use of a sacrificial wax coating such as SureFinish to extend the life of the floor and add a measure of slip resistance.

    FREQUENTLY ASKED QUESTIONS ABOUT HIGH GLOSS CLEAR POLYASPARTIC FLOOR COATINGS:

    QUESTION: CAN I USE JUST ONE COAT OF DURA-KOTE POLYASPARTIC FLOOR COATING?

    Answer: Yes, you can! Although it will depend entirely upon your desired finish floor and amount of protection you need, polyaspartic’s can stand alone as a single coat sealer for your concrete project.

    QUESTION: WILL DURA-KOTE POLYASPARTIC’S SELF-LEVEL AND FILL SMALL HOLES?

    Answer: Yes. It is a higher solids content coating than an acrylic sealer, but is not high enough to fill large voids, however our polyspartic formulations were hybridized to allow for easier product flow and longer pot life, and thus have less solids and elasticity than a prototypical high percentages of solids polyaspartic coating that would bridge larger cracks and voids in the concrete surface.

    QUESTION: CAN DURA-KOTE POLYASPARTIC’S CLEAR COATINGS BE USED OUTSIDE?

    Answer: No, polyaspartic coatings are not vapor-permeable and therefore should not be utilized in exterior applications.

    QUESTION: I HAVE STRICT VOC LAWS IN MY AREA, CAN I USE DURA-KOTE POLYASPARTICS?

    Answer: Please check with your local municipalities to be certain, but given its extremely low VOC rating
    less than 330 grams per Liter (DK120)
    less than 200 grams per liter (DK180) this product can be used in almost all states or municipalities.

    SPECIFICATIONS AND PROPERTIES OF DURA-KOTE 120 POLYASPARTIC FLOOR COATING:

    Coverage   Approx 300-400 square foot per gallon, per coat (varies widely based on substrate porosity and application methods)
    VOC Rating  less than 330 g/L
    Solids Content   67%
    Pot Life   approx 30 minutes
    Shelf Life   1 year in original unopened container
    Ready for recoat   1-2 hours (4-5 hours at low temperatures)
    Light Duty Use   3-4 hours (24-36 hours at low temperatures)
    Heavy Traffic Ready   24-36 hours (3-4 days at low temperatures)
    Full Cure   1-2 days (Up to 7 days at low temperatures)
    Appearance (cured)   Clear Gloss
    Appearance (wet)   Clear
    Water Resistance   Excellent, beads water
    Mechanical Stability   Excellent
    Light Stability   Excellent
    Odor   Aromatic
    Application Temperature   32 – 90 degrees Fahrenheit
    Gardener direct / Reverse impact   More than 160 inch pounds
    Taber Abrasion   40-60 mg loss
    QUV – A   less than 5.0 at 2,000 hours
    Gloss Retention   More than 95% at 2,000 hours

     

    CHEMICAL RESISTANCE FOR DURA-KOTE PFC-120:

    MEK (methyl ehtyl ketone)   no effect at 24 hours, fails at 7 days
    Xylene   no effect at 24 hours, 7 days
    Tap Water   no effect at 24 hours, 7 days
    Mineral Spirits   no effect at 24 hours, 7 days
    100% Ethanol   no effect at 24 hours, 7 days
    10% Acetic Acid   no effect at 24 hours, fails at 7 days
    50% Sodium Hydroxide   no effect at 24 hours, 7 days
    85% Lactic Acid   no effect at 24 hours, fails at 7 days
    50% Sulfuric Acid   no effect at 24 hours, 7 days
    38% Hydrochloric Acid   no effect at 24 hours, 7 days
    28% Ammonia   no effect at 24 hours, fails at 7 days
    10% Sodium Chloride   no effect at 24 hours, 7 days
    Gasoline   no effect at 24 hours, 7 days
    Diesel Fuel   no effect at 24 hours, 7 days
    Kerosene   no effect at 24 hours, 7 days
    Brake Fluid   no effect at 24 hours, fails at 7 days
    Skydrol   no effect at 24 hours, dulls at 7 days
    Coffee   no effect at 24 hours, 7 days
    Cola   no effect at 24 hours, 7 days
    Grape Juice   no effect at 24 hours, 7 days
    Ketchup   no effect at 24 hours, 7 days
    Mustard   transient staining at 24 hours, 7 days
    Clorox Bleach 5-10%   no effect at 24 hours, 7 days

    SPECIFICATIONS AND PROPERTIES OF DURA-KOTE 180 POLYASPARTIC FLOOR COATING:

    Coverage   Approx 150-200 square foot per gallon, per coat (varies widely based on substrate porosity and application methods)
    VOC Rating   less than 200 g/L
    Solids Content   80%
    Pot Life   approx 20 minutes
    Shelf Life   1 year in original unopened container
    Ready for recoat   Approx 2 hours (6-8 hours at low temperatures)
    Light Duty Use   4-6 hours (Up to 24 hours at low temperatures)
    Heavy Traffic Ready   Approx 24 hours (Up to 3 days at low
    temperatures)
    Full Cure   1-2 days (Up to 7 days at low temperatures)
    Appearance (cured)   Clear Gloss
    Appearance (wet)   Clear
    Water Resistance   E xcellent, beads water
    Mechanical Stability   Excellent
    Light Stability   Excellent
    Odor   Aromatic
    Application Temperature   32 – 90 degrees Fahrenheit
    Gardener direct / Reverse impact   More than 160 inch pounds
    Taber Abrasion   40-60 mg loss
    Gloss Retention   More than 95% at 2,000 hours

    CHEMICAL RESISTANCE FOR DURA-KOTE PFC-180:

    MEK (methyl ehtyl ketone)   no effect at 24 hours, fails at 7 days
    Xylene   no effect at 24 hours, 7 days
    Tap Water   no effect at 24 hours, 7 days
    Mineral Spirits   no effect at 24 hours, 7 days
    100% Ethanol   no effect at 24 hours, 7 days
    10% Acetic Acid   no effect at 24 hours, fails at 7 days
    50% Sodium Hydroxide   no effect at 24 hours, 7 days
    85% Lactic Acid   no effect at 24 hours, fails at 7 days
    50% Sulfuric Acid   no effect at 24 hours, 7 days
    38% Hydrochloric Acid   no effect at 24 hours, 7 days
    28% Ammonia   no effect at 24 hours, fails at 7 days
    10% Sodium Chloride   no effect at 24 hours, 7 days
    Gasoline   no effect at 24 hours, 7 days
    Diesel Fuel   no effect at 24 hours, 7 days
    Kerosene   no effect at 24 hours, 7 days
    Brake Fluid   no effect at 24 hours, fails at 7 days
    Skydrol   no effect at 24 hours, dulls at 7 days
    Transmission Fluid   no effect at 24 hours, 7 days
    Coffee   no effect at 24 hours, 7 days
    Cola   no effect at 24 hours, 7 days
    Grape Juice   no effect at 24 hours, 7 days
    Ketchup   no effect at 24 hours, 7 days
    Mustard   transient staining at 24 hours, 7 days
    Clorox Bleach 5-10%   no effect at 24 hours, 7 days