Unsealed and unprotected tile and grout can stain, chip, crack or fade. Apply CCI Tile Armor™ Enhancer to your tile, natural stone and grout to protect against staining and damage or as a pre-grouting sealer.
Add a wet-look finish to your stone tile, grout or natural stone without adding sheen.
PLEASE NOTE: This is NOT a sealer for Ceramic or Porcelain Tile! Glazed tiles do not need a sealer, and will not accept a sealer, so you will just make a mess!!!
In addition to protecting your porous tile, grout and natural stone, CCI Tile Armor™ Enhancer will give your surface a "wet-look" without adding sheen.
CCI Tile Armor™ can be used on grout, limestone, saltillo tile, clay tile, stucco and concrete/masonry. Effective on interior and exterior applications.
- For application tips view the Technical Data Sheet
Please check local regulations for VOC requirements.
Clean up with Xylene
Finish: Matte "Wet Look"
Packaging: 32oz Quart
Shipping: Ships UPS Ground only due to the solvent base. No Air shipping available.
- 20-25** sq. ft. per pint
- 40-50** sq. ft. per quart
- 160-200** sq. ft. per gallon
- **Coverage rate varies based on type of tile, porosity and texture of the surface, temperature, humidity and application method.