Water-Based Epoxy, Surecrete ColorTec 600WB

Loading reviews...
$149.09
  • Water-Based Epoxy, Surecrete ColorTec 600WB
Water-Based Epoxy, Surecrete ColorTec 600WB Water-Based Epoxy, Surecrete ColorTec 600WB Water-Based Epoxy, Surecrete ColorTec 600WB

Water-Based Epoxy, Surecrete ColorTec 600WB

Loading reviews...
$149.09
Usually takes 1-2 business days to ship.
Ships via UPS only

Free shipping for online-orders $49 or more!! (US 48)

  • PLEASE NOTE!! We are currently not able to ship this Surecrete product to any states on the Eastern Half of the United States. We are limited to shipping to states including, and to the West of: Texas, New Mexico, Colorado, Wyoming, Montana.

    SureCrete’s ColorTec 600WB Concrete Epoxy

    • Water-Based epoxy, great for your first/primer coat onto concrete.  ColorTec 600WB Epoxy is the perfect primer for all epoxy flooring systems. It is a 2-component coating that can easily be applied and will shut off outgassing in concrete.
    • This epoxy can be colored, and has is ideal as a moisture barrier that can cause problems with solvent-based epoxy (but once concrete is primed with this water-based epoxy, then solvent based epoxy, polyurethane, or polyaspartic top-coats work great over it
    • Coverage: 125-175 sq. ft. per gallon (mixed/catalyzed product)
    • Clear Epoxy is sold in 2 Gallon Kits (mix 1 A and 1 B to make 2 gal)
    • Pigmented Epoxy is sold in 1 Gallon Kits (mix 4 A and 1 B to make 1 gal) and 5 Gallon Kits (mix 4 A and 1 B to make 5 gal)

    SureCrete’s ColorTec 600WB, also called Dura-Kote Water-Based Colored Concrete Epoxy, is a 2 component 52% solids, low VOC floor coating system that is used in a wide variety of applications: durable colored layer for both new and old interior concrete floors, primer coat, and binder for Dura-Kote Flakes and Metallics. The high loading of SureCrete pigments achieves the preferred substrate hide and tint uniformity in 100’s of colors. Dura-Kote epoxy concrete water based sealer generates the premier balance of strength, flexibility, and chemical resistance, all in a low odor, low VOC formulation. Unlike nearly all epoxies, Dura-Kote Water Based Concrete Epoxy for Floors has remarkable properties related to moisture:

    • Withstands high vapor transmission rate, up to 13 pounds per 1,000 ft² (5.4 kg per 100m²) in 24 hours.
    • Provides a non-permeable vapor barrier, even in basements.
    • Applies on fresh concrete as soon as three days after pouring and placing concrete.

    Applications range from manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, hospitals, medical centers, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired.

    Pigmented Water Based Epoxy can create products that are vastly different than conventional colored concrete sealers available on the market today. The tints used by SureCrete’s colored water based floor epoxy for floors are far more durable and UV resistant than typical pigmented concrete sealers. With these pigments, your finished colored water-based epoxy coating system will last much longer than a normal water-based epoxy sealer ever would, with the color staying much more vibrant over a long period of exposure. Not only are the tints more durable and UV-stable than typical colored concrete sealers, but the color range available is also quite a bit wider than those available on the market presently. ColorTec Colored WB Epoxy for floors is available in more than 200 standard colors and we can even match your desired color palette from a different manufacturer such as Sherwin-Williams, Dupont, Baer, Valspar or Scott Paints. Or, if you’re looking for a bit more panache, we can also perform themed color matching such as State University colors, Professional sports teams themes or even your favorite movie or television show!

    Clear Water Based Epoxy works great to just seal a concrete floor (Stained concrete floor for example) to gain the benefits of creating a vapor barrier and then putting on a very hard, durable Polyurethane  

    Documentation:

    HOW DO YOU APPLY SURECRETE COLORED WATER BASED CONCRETE FLOOR EPOXY?

    Water-Based Epoxy coatings can be tricky to apply, but with these instructions, your floor will turn out beautifully:

    1. Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants, and fully profiled and etched. Moisture should also be limited as colored water-based epoxy systems are non-vapor-permeable sealers.
    2. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and a relative humidity below 75% and there will be no precipitation in the applied areas for a 12 hour period following application.
    3. Setup a mixing area that’s out of the way of your application area, and begin by mixing Part A for three minutes to make sure the pigments are properly dispersed.
    4. Pour in 1 part B to 4 parts A for a minimum of three minutes and pour out ALL material onto intended application surface.
    5. First coat can be applied using a squeegee or premium quality roller.
    6. Once the product has been rolled/squeegeed out evenly, it should be back-rolled to eliminate roller marks and achieve even color distribution.
    7. First coat may function as a stand-alone product depending on your desired application. However, for a more scratch-resistant complete coating system, apply a finish coat utilizing a polyurethane or polyaspartic transparent coating.
    8. If applying a finishing top coat, and the first layer has been allowed to cure for more than 12 hours, first coat should be screened with a 100 grit sanding screen.
    9. While not required, we suggest the application of a Sacrificial Coat such as SureFinish to your floor to ensure its integrity over an extended period without wearing down the original surface.

    FREQUENTLY ASKED QUESTIONS ABOUT DURA-KOTE COLORED WATER BASED CONCRETE FLOOR EPOXY:

    QUESTION: CAN DURA-KOTE COLORED WATER BASED CONCRETE EPOXY FOR FLOORS BE USED AS A SINGLE-COAT SYSTEM?

    Answer: While it certainly can be used as a single coat system, we usually suggest a finish coat be applied as well as a sacrificial coating to give better scratch and chemical resistance and ensure the overall system lasts as long as possible.

    QUESTION: WILL WATER BASED CONCRETE EPOXY FOR FLOORS SELF-LEVEL AND FILL SMALL HOLES?

    Answer: No, the solids content of colored water based concrete epoxy products are not high enough to enable an applicator to fill holes in your concrete substrate. Proper concrete patching and leveling materials should be utilized prior to sealer application.

    QUESTION: CAN I DILUTE DURA-KOTE CWATER BASED CONCRETE EPOXY FOR FLOORS?

    Answer: Yes, it can be diluted up to 15% by volume with water.

    SPECIFICATIONS AND PROPERTIES DURA-KOTE COLORED WATER BASED CONCRETE EPOXY FOR FLOORS:

    Coverage 125-175 square foot per gallon catalyzed product (varies widely based on application method)
    VOC Rating 175 g/L
    Solids Content 52%
    Shelf Life 1 year in original unopened container
    Mixing Ratio 4 parts A to 1 part B
    Pot Life 1 hour
    Ready for recoat dry to the touch (4-18 hours)
    Light Duty Use 16-30 hours
    Full Cure 5-14 days

    TEST DATA FOR COLORED WATER BASED CONCRETE EPOXY FOR FLOORS:

    Appearance (cured) Gloss sheen
    Water Resistance Excellent, beads water
    Mechanical Stability Excellent
    Light Stability Fair
    Odor Epoxy
    Application Temperature 50 – 90 degrees Fahrenheit

    CHEMICAL RESISTANCE FOR DURA-KOTE COLORED WATER BASED CONCRETE EPOXY FOR FLOORS:

    MEK not recommended
    Xylene 2 hours splash spill
    Gasoline 2 hours splash spill
    10% Sodium Hydroxide 8 hours splash spill
    50% Sodium Hydroxide 2 hours splash spill
    Acetic Acid 5% 2 hours splash spill
    10% Sulfuric Acid 2 hours splash spill
    10% Hydrochloric Acid 2 hours splash spill
    20% Nitric Acid not recommended
    Ethylene Glycol 8 hours splash spill