Product Details:

• UV Shield™ is a two-component, 100% solids hybrid epoxy resin, designed to eliminate the yellowing common to most 100% solids epoxies.
• UV-Resistant, Clear High-Build Epoxy Floor Coating for Light and Moderate Duty Commercial and Industrial Use
• Formulated for superior resistance to ultra-violet degradation and excellent resistance to impact and abrasion.
• Has virtually no odor and can be used as a zero VOC alternative to chemical resistant urethane finish coats.
• Used primarily as a finish coat for Quartz and Flake decorative flooring systems or as the primary wearing surface when applied to primed concrete.
• Recommended for indoor use only.
• U.S.D.A. acceptable.
• UVShield can be used as a top coat and wearing surface on a variety of prepared substrates: Epoxy primed concrete, Troweled resinous flooring, Decorative floor systems, Self-leveling systems.
• UV Shield is also easily pigmented for use as a colored topcoat that will not show the effects of UV exposure that is common to epoxies.
• UV Shield is only for application over previously primed or broadcast surfaces only. Do not use direct to concrete.  Concrete must be primed first with Shield 50, or use UV Shield directly on an overlay (Micro Topping, Stamp-Tek, Acrylic Overlay).

Pigmented Color Chart:

Product Specifications:

• Available in 1, 3, 5, and 15 Gallons. Also available in Drums upon request.
• Coverage: 1 Gallon covers approx. 200 sq ft at 8 mils thick.
• Mix ratio is 2:1 A:B
• Apply by squeegee in left to right motions, and back roll with a short-nap roller at 90° angles to squeegee lines. Do not roll excessively, only enough to smooth material.  For full application instructions, see UV Shield TDS.
  
• UV Shield TDS (Technical Data Sheet).
• UV Shield MSDS (Material Safety Data Sheet).