Concrete Mold Form Release Agent, Crete Lease 880 - Bulk Cresset
Concrete Mold Form Release Agent, Crete Lease 880 - Bulk Cresset
Concrete Mold Form Release Agent, Crete Lease 880 - Bulk Cresset
Concrete Mold Form Release Agent, Crete Lease 880 - Bulk Cresset
Concrete Mold Form Release Agent, Crete Lease 880 - Bulk Cresset
Concrete Mold Form Release Agent, Crete Lease 880 - Bulk Cresset

Concrete Mold Form Release Agent, Crete Lease 880 - Bulk

Sale price$219.09
Size:

Size

Quantity:
Fast Ship: Usually takes 1-2 business days to ship out.
Ships from Oregon
(Click for average Ground delivery map )

Concrete Mold Form Release Agent, Crete Lease 880 - Bulk

  • The environmentally friendly industry staple Crete-Lease 880 is a proprietary blend is comprised of neutralized vegetable oils in mineral oil that contains no waxes, silicones, or carcinogens; it's also solventless and non-toxic.  Notably, this advanced composition exceeds Federal, OTC State, and California (250 g/L) VOC Regulations.  The end result mimics the surface of molds and site amenities with a superior finish for visually stunning concrete surfaces – without bugholes.

  • Crete Lease 880 Bulk product is available in cases of 12 Aerosol Cans, Single Gallons, and 6 Gallon Cases (gallon sizes are unpressurized, and can be rolled, brushed, or sprayed (for best results you should spray) with an HVLP or pump-up sprayer with 25+ PSI).
  • If you are looking for smaller quantity, we sell the 880 aerosol cans individually here.
  • Uses include: Rubber (polyurethane) Molds, Fiberglass Molds, Form Liners, and concrete forms and casting (880-VOC is not for natural rubber or latex- use the 20-VOC-XTRA Release product for natural rubber or latex molds) 

  • Crete-Lease 880 permits easy, stain-free removal of forms, formliners, pallets, etc. from hardened concrete
  • Cuts form clean-up time up to 70% when properly applied
  • Reduces bugholes on concrete surfaces
  • Doesn't interfere with adhesion of caulk, architectural coatings, paint, sealers and curing compounds on cured concrete surfaces when properly applied
  • Sprays upside down, or rightside up.
  • Can be applied in sub-freezing or very hot temperatures
  • Reduces incidences of skin rashes
  • Promotes longer form life by acting as a water repellent from inside the wood
  • Produces high visual impact (CCS 1) concrete surfaces
  • Does not stain or stick from steam curing
    • Limitations: A) Not recommended for forms or form liners made from expanded polystyrene, SBR, or natural rubber, or latex. B) Although subfreezing temperatures have no effect on the releasing action of Crete-Lease 880, temperatures below freezing promote thicker film thicknesses which causes more bugholes.
  • Applicable Standards: Exceeds California's SCAQMD rule 1113-90 (250 g/L). "Cresset Concrete Standards", a photographic appearance guide. Corps of Engineers, "Civil Works Construction Guide Specifications," CW-03101, Section 5.3 and Section 8. Corps of Engineers, "Guide Specification Military Construction," CEGS-03300, Section 10.8.

Technical Data Concrete Mold Form Release Agent, Crete Lease 880 - Bulk:

  • 880-VOC Release Data Sheet
  • Coverage: 1500 sq. ft. per can (Aerosol- Please note that Aerosols cannot ship via Air (PLEASE don't select 1-Day or  2-Day shipping at checkout if buying the aerosol cans)
  • Coverage (hard/smooth surface): 1,600 sq. ft. per gal
  • Coverage (pre-oiled plywood): 1,100 sq. ft. per gal
  • Coverage (untreated plywood): 800 sq. ft. per gal
  • Color: Straw
  • Opacity: Clear
  • Freeze Damage: None. Freeze Temperature: -15F
  • Flash Point: Not applicable
  • Viscosity (centipoises): Not applicable
  • Solids: None
  • Density: 7.37 lbs/gal
  • VOC (Volatile Organic Compounds): 245 g/l
  • Composition: A proprietary blend of neutralized vegetable oils in mineral oil. Contains no waxes, no silicones...no carcinogens.

Form Material Compatibility:

  • Plywood: All Grades, Pre-oiled, Overlaid (LDO, MDO, HDO). Fiberglass, ABS, PVC, Epoxy, Urethane, Silicone, Steel, Aluminum, Wood.

Application Concrete Mold Form Release Agent, Crete Lease 880 - Bulk:

  • Apply minutes, hours, or days before placing concrete.
  • Form surfaces must be clean, and dry.
  • For best results, apply an ultra-thin film.
  • Spray or wipe the release on. If runs or puddles occur, wipe them off.