Exterior Concrete Clear Sealer Solvent Acrylic Gloss Super Series by SureCrete

Economy Clear Outdoor Acrylic Sealers by SureCrete

SureCrete’s Super Series ( Super 20 / Super 30 ) exterior concrete clear sealer used to protect existing concrete and cement-based overlays. The Super Series sealer uses quality acrylics to allow for a consistent color enhancement, high gloss finish, and breath-ability that minimizes cloudiness and haziness when moisture is trapped underneath the outdoor concrete.

The Super Series is only available for states that allow concrete waterproofing sealers and treatments with VOC up to 600 g/L. If your state follows the Northeast Ozone Transport Commission (OTC) or you live in the state of California, the Super Series is NOT available for use. Please see the HS Series for products that meet the approved VOC laws.

Areas Where Clear Outdoor Sealers Can be Applied:

How to Apply SureCrete Super20 / Super30 Outdoor Clear Sealer?

Our Acrylic Sealer products are some of the easiest to implement and use:

1. Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants, and fully profiled and etched.
2. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and there will be no precipitation in the applied areas for a 24 hour period following application.
3. Super 20/30 clear acrylic sealer can be applied by roller, airless sprayer or pump-up sprayer. Whatever your application technique, make sure to apply thin, even coats over your surface.
4. Two coats are typically suggested with any exterior project receiving an acrylic sealer, with the second coat being applied as soon as the first coat can be walked on, and is used in the same manner as the first layer.

Frequently Asked Questions About Super Series Clear Outdoor Sealer:

Question: Can I use just one coat of Outdoor Clear Sealer?

Answer: Technically yes, however, it is not suggested. For the best results, we highly recommend using two thinly applied coats of Super Series Acrylic Clear Concrete Sealer.

Question: Will Super Series Clear Outdoor Sealer self-level and fill small holes?

Answer: No, acrylic concrete sealer products were not designed to meet these application criteria.

Question: Will SureCrete’s Super Series clear concrete sealers survive the freeze/thaw cycles in my area?

Answer: While it is slightly less durable in this regard than our HS Series premium acrylic sealer products, it does still have some moisture-migration-reducing properties.

Specifications and Properties of SureCrete’s Concrete Clear Outdoor Sealer – Super Series (Solvent)

Super 20 Clear Outdoor Solvent Acrylic Sealer

Super 20 is a twenty percent solids, solvent based, crystal clear acrylic, color-enhancing, high gloss finish designed to waterproof, seal, and treat smooth, broomed, and textured concrete exterior surfaces.

Solids 20%
VOC Rating 600 g/L
Appearance (Cured) Clear, Gloss
Appearance (Wet) Clear
Application Temperature 50°F – 90°F (10° – 32°C)
Odor Solvent
Sizes Available: 1-Gal & 5-Gallon

Super 30 Clear Exterior Solvent Acrylic Sealer

Super 30 is a thirty percent solids, solvent based, crystal clear acrylic, color-enhancing, high gloss finish designed to waterproof, seal, and treat cement-based overlays on exterior surfaces.
Solids 30%
VOC Rating 600 g/L
Appearance (Cured) Clear, Gloss
Appearance (Wet) Clear
Application Temperature 50°F – 90°F (10° – 32°C)
Odor Solvent
Sizes Available: 5-Gallon

TEST DATA – Super Series (Solvent 20/30)@ 2-coat application

Blush: 4 hr. dry /No blush 18 hr. immersion
Adhesion: D-3359
Dry Concrete: Excellent
Wet Concrete: Excellent
QUV accelerated weather testing: G-53 250 hr. no blistering, no yellowing
Abrasion resis­tance: 12.5 grams loss
Block resistance: D-4946 Excellent
Heat stability: @ 120°F (49°C) D-1849 Excellent
Film formation: @ 40°F (4°C) Passed
Water absorption: 2.4 g /m³
Pencil hardness: D-3363 / HB-H
Hot tire pick-up: Passed*

TESTING ASTM D-1308

Transmission fluid: Resistant
Gasoline: Remove immediately
Formula 409: Resistant
Motor oil: Resistant
Brake fluid: Remove immediately